PLANET IP30 Industrial L2+/L4 8-Port Managed L2+ Gigabit Ethernet (10/100/1000) Aluminium, Blue

> Physical Port

> 8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ injector function

> 2 10/100/1000BASE-T Gigabit Ethernet RJ45 ports

> 2 100/1000BASE-X SFP ports for SFP type auto detection

> 2 100/1000/2500BASE-X SFP ports for SFP type auto detection

> One RJ45 console interface for basic management and setup

> Power over Ethernet

> Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE

> Up to 8 IEEE 802.3af/802.3at devices powered

> Supports PoE power up to 36 watts for each PoE port

> Auto detects powered device (PD)

> Circuit protection prevents power interference between ports

> Remote power feeding up to 100m

> PoE management features

> PoE admin-mode control

> PoE management mode selection

> PoE legacy mode selection

> PoE budget setup option

> Per port PoE function enable/disable

> PoE port power feeding priority

> Per PoE port power limit

> PoE port status monitoring

> PD classification detection

> Sequence port PoE

> PoE extend mode control to support power feeding up to a distance of up to 160 meters

> Intelligent PoE features

> Temperature threshold control

> PoE usage threshold control

> PoE schedule

> PD alive check

> LLDP PoE Neighbors

> Industrial Protocol

> Mod bus TCP for real-time monitoring in the SCADA system

> IEEE 1588v2 PTP (Precision Time Protocol) transparent clock mode

> Industrial Case and Installation

> IP30 aluminum case

> DIN-rail or wall-mount design

> 48~56V DC, redundant power with reverse polarity protection

> Supports 6KV DC Ethernet ESD protection

> 40 to 75 degrees C operating temperature

> Digital Input and Digital Output

> 2 digital input (DI)

> 2 digital output (DO)

> Integrate sensors into auto alarm system

> Transfer alarm to IP network via email and SNMP trap

> Layer 3 IP Routing Features

> Supports maximum 32 static routes and route summarization

> Routing interface provides per VLAN routing mode

> Layer 2 Features

> Storm Control support

> Broadcast / Multicast / Unicast

> Supports VLAN

> IEEE 802.1Q tagged VLAN

> Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)

> Private VLAN Edge (PVE)

> Port Isolation

> MAC-based VLAN

> IP Subnet-based VLAN

> Protocol-based VLAN

> VLAN Translation

> Voice VLAN

> GVRP

> Supports Spanning Tree Protocol

> IEEE 802.1D Spanning Tree Protocol (STP)

> IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)

> IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN

> BPDU Filtering/BPDU Guard

> Supports Link Aggregation

> 802.3ad Link Aggregation Control Protocol (LACP)

> Cisco ether-channel (static trunk)

> Maximum 6 trunk groups with 4 ports per trunk group

> Up to 8Gbps bandwidth (duplex mode)

> Provide sport mirror (many-to-1)

> Port mirroring to monitor the incoming or outgoing traffic on a particular port

> Loop protection to avoid broadcast loops

> Supports ERPS (Ethernet Ring Protection Switching)

> Compatible with Cisco Uni-directional link detection(UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices

> Link Layer Discovery Protocol (LLDP)

> IEEE 802.3ah OAM