Ubiquiti USW-Pro-Max-48-PoE UniFi 48 port multi-gigabit PoE++ switch, with layer3 features and etherlighting
USW-Pro-Max-48-PoE
810084692721
A 48-port, Layer 3 Etherlighting™ switch with 2.5 GbE and PoE++ output.
Etherlighting™ ports that illuminate to indicate port location, speed/link, and native VLAN/network*
(16) 2.5 GbE ports including (8) PoE+ and (8) PoE++
(32) GbE ports including (24) PoE+ and (8) PoE++
(4) 10G SFP+ ports
DC power backup ready
720W total PoE availability
Managed with UniFi Network 8.0.24 and later
*Pair with UniFi Etherlighting Patch Cables for optimal brightness.
The estimated delivery time is provided by the carriers. It allows you to determine the expected date when your order will reach you.
Recommended accessories:
Ubiquiti USW-PRO-MAX-48-POE: professional network switch
The Ubiquiti USW-PRO-MAX-48-POE multilayer switch is an advanced solution for businesses and institutions to provide a fast and reliable Ethernet network. With Layer 3 functionality and a high routing/switching bandwidth of 224 Gbit/s, this switch is ideal for handling large amounts of data in high-performance environments.
Basic Ethernet switching RJ-45 ports type 2.5G Ethernet (100/1000/2500) and 24 Ethernet ports provide flexible connectivity for a wide range of devices, from computers to access points. In addition, the Ubiquiti USW-PRO-MAX-48-POE comes with 4 installed SFP+ modules for integration with other network devices and to expand its functionality.
PoE (Power over Ethernet) support allows devices to be powered directly via Ethernet cable, eliminating the need for additional power cables and simplifying network management. Rack-mount capabilities make the Ubiquiti USW-PRO-MAX-48-POE easy to install and integrate into existing infrastructure.
| Mechanical | |
|---|---|
| Dimensions | 442.4 x 400 x 44 mm (17.4 x 15.7 x 1.7") |
| Weight | Without mounting brackets: 6.2 kg (13.7 lb)
With mounting brackets: 6.3 kg (13.9 lb) |
| Enclosure material | SGCC steel |
| Hardware | |
| Management interface | Ethernet In-Band |
| Networking interface | (32) GbE RJ45 ports (16) 1/2.5 GbE RJ45 ports (4) 10G SFP+ ports |
| PoE interface | (32) PoE/PoE+ (Pins 1, 2+; 3, 6-) (16) 60W PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-) |
| Total non-blocking throughput | 112 Gbps |
| Switching capacity | 224 Gbps |
| Power method | (1) Universal input, 100—240V AC, 50/60 Hz (1) USP-RPS DC input |
| Power supply | AC/DC, internal, 820W |
| Supported voltage range | 100—240V AC |
| Max. power consumption | 100W (Excluding PoE output) |
| Total available PoE | 720W |
| Max. PoE wattage per port by PSE | PoE: 15.4W PoE+: 30W PoE++: 60W |
| Voltage range PoE mode | PoE: 44—57V PoE+: 50—57V |
| LCM display | (1) 1.3" touchscreen |
| Button | Factory reset |
| Ambient operating temperature | -5 to 40° C (23 to 104° F) |
| Ambient operating humidity | 10 to 90% noncondensing |
| Certifications | CE, FCC, IC |
| Switching Features | |
| Layer 2 features | IGMP snooping STP / RSTP with priorities and port-level disable Port isolation Storm control Voice VLAN Port mirroring LACP port aggregation Multicast / broadcast rate limiting MAC address blocking Flow control 802.1X control Jumbo frames Proprietary loop protection DHCP snooping / guarding Egress rate limit LLDP-MED Port restricted by MAC Device isolation with ACLs |
| Layer 3 features | DHCP for locally-managed networks DHCP relay Inter-VLAN routing between networks on same switch Static routing between local networks Network isolation with ACLs |
| Etherlighting™ | |
| Ethernet | Locating Speed/link Native VLAN/network |
| SFP+ | Locating Speed/link Native VLAN/network |
| LEDs | |
| System | Status |
| RPS | Status |
| Application Requirements | |
| UniFi Network | Version 8.0.24 and later |
