Heat Sink Compounds

show
Sort by
Selected filters:
71.01 ₪ excl. VAT
83.08 ₪ incl. VAT

QNAP TPAD-M2SSD-01 Thermal Pad Kit for HS-453DX (silicone)

Part number: TPAD-M2SSD-01

Manufacturer: QNAP

54.69 ₪ excl. VAT
63.99 ₪ incl. VAT
30.23 ₪ excl. VAT
35.37 ₪ incl. VAT

Heatsinks and thermal pads for servers and SSDs

Heatsinks dissipate heat from electronic components, particularly processors. Without effective cooling, components are at risk of overheating, thermal throttling (automatically reducing performance to limit temperature) and faster wear. In this category, you’ll find processor heatsinks for Dell servers and QNAP thermal pads for M.2 SSDs.

Processor heatsinks in servers

A heatsink is a finned metal structure that draws heat from the processor and releases it into the air. In servers, it is selected for a specific platform, and its correct operation determines the stability of the entire system.

Passive and active heatsinks

Passive heatsinks do not have a fan and dissipate heat through thermal conduction and airflow. In servers, chassis fans force air through the fins, so the heatsink design is matched to the air ducts in the particular model. Active heatsinks have their own fan, which forces air through the fins. They provide better cooling than passive solutions, but generate noise and require maintenance.

Thermal Design Power (TDP) and thermal resistance (Rth)

TDP (Thermal Design Power) is the amount of heat that the cooling system must dissipate under typical load. The heatsink must be designed for a processor with the same TDP as the one installed. Thermal resistance (Rth), expressed in K/W or degrees Celsius per watt, indicates how effectively a heatsink transfers heat: the lower the value, the better the heat dissipation.

Server compatibility

Before buying, check that the heatsink is designed for the server model and processor socket, and that it is suitable for the chassis height (e.g. 1U or 2U) and single- or dual-processor configuration. Original server-manufacturer heatsinks are designed and tested with the relevant platform, making replacement easier and helping to preserve warranty conditions.

Thermal pads for M.2 SSDs

NVMe SSDs (an interface for high-speed SSDs) installed in an M.2 socket heat up during prolonged, intensive read and write operations. If the controller temperature exceeds a threshold that varies by model, the drive reduces its performance. A thermal pad transfers heat from the controller and memory chips to the heatsink or device chassis.

The range includes QNAP thermal pads made of silicone, 1.5 mm thick, in packs of 6 and 12. Each pack is designed for selected QNAP devices with M.2 sockets, so check compatibility with your device model before buying.

Thermal pads: when to use them

Thermal pads are flexible and fill gaps between a component and a heatsink or chassis, making them suitable for components of varying heights, such as SSD controllers. They do not dry out and do not need to be spread. They are available in different thicknesses, which should be selected according to the gap between the component and the heatsink.

How to choose a heatsink and thermal interface material

  • Processor TDP: choose a heatsink designed for the thermal power of the installed processor.
  • Server model and socket: check mechanical compatibility and chassis height.
  • Airflow: make sure the heatsink works with the fans and air ducts in the chassis.
  • Thermal interface: for M.2 drives, choose a pad of the correct thickness and size for the gap between the drive and the heatsink or device chassis.
  • Warranty: for devices under warranty, it is safest to use parts recommended by the manufacturer.

Regularly removing dust from heatsinks and filters helps maintain cooling efficiency, as blocked fins restrict airflow.

Frequently asked questions

Can a Dell server heatsink be replaced with a different one?

The heatsink should be compatible with the server model, socket and processor power. A third-party replacement may not fit mechanically or meet thermal requirements, so for devices under warranty it is safest to use manufacturer parts.

Does a passive heatsink need a fan?

A passive heatsink does not have a fan of its own, but it needs airflow to cool properly. In servers, this is provided by the chassis fans.

What is a thermal pad used for?

A pad is a flexible sheet that fills the gap between a component and a heatsink or chassis and transfers heat. It does not need to be spread, making it easy to install, including when components are removed frequently.

Does an NVMe SSD need a heatsink or pad?

During prolonged, intensive read and write operations, NVMe drives can heat up enough for the controller to reduce performance. A pad or heatsink helps dissipate heat and maintain a stable speed. SATA SSDs generally do not require additional cooling.

What thickness of thermal pad should I choose for an M.2 SSD?

The thickness depends on the gap between the drive and the heatsink or device chassis. The safest option is to choose a kit designed for the specific device model, as the manufacturer selects the thickness to suit the socket design.

What does thermal conductivity in W/mK mean?

This is a measure of how well a material conducts heat. The higher the W/mK value, the more effectively the pad transfers heat from the component to the heatsink.

How often should a thermal pad be replaced?

A pad may lose its flexibility and fit over time, and the replacement interval depends on the product and its operating load. An increase in temperature under the same load is a sign that it may need replacing. For devices under warranty, follow the manufacturer’s recommendations.

Choose a heatsink for your configuration

Heatsinks and thermal interface materials play an important role in the stable operation of servers and data storage devices. Browse the available products and match them to your device model, processor and M.2 drives.

Stay in touch!
Join our newsletter and stay up to date with our promotions and news.

By clicking "Subscribe" you agree to receive marketing information at your e-mail address. Your personal data will be administered by Senetic SA with its registered office in ul. Przewozowa 32, 44-100 Gliwice, Poland. You have the right to demand access to personal data and to rectify, erase or limit the processing, as well as to object to the processing. Detailed information on the processing of personal data can be found in the privacy policy.

Incorrect e-mail address
This e-mail address has already been confirmed.
This e-mail address has not been confirmed yet.
Thank you!
Check your inbox - you will receive a message from us asking you to confirm your subscription to the newsletter.
Please wait ...
Compare (0/4)